Place of Origin | Sichuan, China |
Brand Name | horizontal-slurrypump.com |
Certification | ISO9001 |
Model Number | OEM |
Document | Product Brochure PDF |
Centrifugal Resistant Submersible Vertical Chemical Pump Submerged Pump Multi Stage Centrifugal Pump
Product Data
Model: WDL-series vertical centrifugal pump | |
Discharge Size: 40mm~200mm | |
Inlet Size: 50mm~250mm | |
Capacity: 8 ~ 800 m³/h | |
Head: 10 ~ 90 m | |
Maximal Efficiency: 70% | |
NPSH: 1.4m~4.5m | |
Allowable Max Motor Power: 315 kw |
|
Impeller | Allowed Max Particle Size: 20 mm |
Vanes: 5/6 | Seal Type: / |
Type: closed/ half open | Pump Weight:up to 3000 kg |
Material:Metal (according to working conditions ) | RPM: 1450 r/min |
Features
The impeller is designed as a wide-flow impeller according to the principle of multi-phase flow, which is beneficial to the passage of solid medium without causing clogging. The back blade is used to balance part of the axial force and prevent the medium reflow. The support tube and the outlet tube are made of stainless steel welded structure, excellent in rigidity and corrosion resistance. The bearing is lubricated by grease.
The shaft adopts low cantilever ratio design, and adopts heavy-duty cylindrical roller bearing and double row angular contact ball bearing, which can bear large radial load and axial load. The shaft adopts rigid design, thick shaft, less shaft shoulder, good shaft rigidity. The pump runs with low vibration and low noise, prolong the service life
WDL series anti-corrosion and wear-resistant horizontal centrifugal pump adopts integral casting impeller. The pump body adopts wide flow channel design, which makes the pump adaptable to the working conditions and has strong pump passing ability. It is especially suitable for high solid content, high viscosity and easy crystallization medium. It has high efficiency and excellent anti-cavitation performance. The impeller has a back blade, which can reduce the axial thrust and prevent the solid particles entering the auxiliary impeller.
The whole unit is installed on the base. The base is made of integral thick steel plate with good rigidity, high strength, anti-deformation and easy installation.
Application
Structure
1 | Impeller nut | 8 | Pump cover | 15 | base | 22 | framework oil seal | 29 | bearing box |
2 | strainer | 9 | shaft | 16 | flange | 23 | Upper shaft | 30 | O ring |
3 | Screw nut | 10 | Support pipe | 17 | flange | 24 | Motor base | ||
4 | key | 11 | Discharge pipe | 18 | Lower shaft | 25 | coupling | ||
5 | Pump body | 12 | spacer sleeve | 19 | oil retaining disk | 26 | key | ||
6 | impeller | 13 | framework oil seal | 20 | Shaft body | 27 | Upper shaft cover | ||
7 | elbow | 14 | Lower shaft cover | 21 | Bearing box cover | 28 | inner hexagon screw |
Product Show
Service
CONTACT US AT ANY TIME